Paramètres
Livraison rapide
Livraison gratuite
Incoterms
Types de paiement
Produit marketplace
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Product List
The NXB family of devices adds even more features to the NXS family. There is no pass transistor as in the LSF and NXS families, the outputs are push-pull stages instead of open drain with pull-up resistors, one-shot circuits for both rising and falling edge acceleration in both directions, and a weak buffer with a 4 kΩ resistor is used to drive the signals and not conflict with the edge accelerators. Like the NXS and LSF families, the higher voltage should be attached to the B-side. The output Enable signal powers the one-shot circuits and the output buffers.
PTM Published on: 2022-03-22
France