Paramètres
Livraison rapide
Livraison gratuite
Incoterms
Types de paiement
Produit marketplace
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Product List
During a short circuit event, the current will attempt to increase to the maximum available from the supply. The controller will respond as follows: 1) The output voltage is pulled to GND, 2) The load current will then surge towards the maximum allowed by line impedance and inductance, 3) Once the current has exceeded the limit, the controller responds by pulling down the gate voltage to the MOSFET, shutting it down, 4) When the current is below the threshold the gate will begin to rise again and will hold the current at the limit until the TIMER expires. Then it will shut down the MOSFET.
PTM Published on: 2008-04-29
France