VideoLibrary

BF4 – Hirose’s Unidirectional Active Optical Connector System

Hirose, a leader in the design and manufacture of innovative connector solutions, has developed a unidirectional active optical connector system with built-in E/O on the Tx (transmit) end and an O/E on the Rx (receiver) end. The BF4M optical connector system converts a balanced high-speed differential electrical signal on a PCB at one end into a MM optical signal for transmission down a very thin flexible FO cable, and then converts it back into an electrical signal on the other end. The BF4M Series is designed as a separate plug and receptacle that solders to the PCB to eliminate the thermal issues associated with soldering the E/O and O/E devices directly to the PCB.

3/12/2020 3:20:47 PM

Part List

ImageRéférence fabricantDescriptionQuantité disponibleAfficher les détails
HGH SPD OPTCL TRANS CBL 75MBF4MC-6GTXRX-B1-75MMHGH SPD OPTCL TRANS CBL 75M0Afficher les détails
CABLE BF4 TRANS PLUG 1MBF4MC-6GTXRX-B1-1MCABLE BF4 TRANS PLUG 1M0Afficher les détails
HGH SPD OPTCL TRANS CBL 3MBF4MC-6GTXRX-B1-3MHGH SPD OPTCL TRANS CBL 3M0Afficher les détails
HGH SPD OPTCL TRANS CBL 5MBF4MC-6GTXRX-B1-5MHGH SPD OPTCL TRANS CBL 5M0Afficher les détails
CONN 14POS SMD GOLDBF4-TX-14DS-0.5VCONN 14POS SMD GOLD0Afficher les détails

Présentations produits connexes

Système de connecteurs optiques série BF4M Les connecteurs optiques actifs unidirectionnels de la série BF4M miniature de Hirose réduisent l'espace de montage sur la carte à circuit imprimé pour l'automatisation industrielle, l'électronique médicale et bien davantage.

Articles connexes

FRAM Can Lower Power and Increase Performance in MCU-Based Systems Designers working with microcontrollers (MCUs) have come to rely heavily on flash memory for code storage because IC makers have scaled the manufacturing processes for the nonvolatile memory and are producing quite large flash arrays on MCU ICs.