Fiche technique pour 1610(CP)

Data Sheet m 0 mm Pam an Isopropyl Alcohol (IPA) Wipes - 99% pH: Neutral Vapor Denslty: 2.071Air=1) Freexlng Palm: m 7126‘F1788“C) lam-man 100 n. in nip-mp tub, non-waven p l‘lD-IDODS 100 ct. in disposable tub, nan-wcv lam-max mu a. refill, nan-woven pow mtl. auoasuaaa . www mhspraymm
Isopropyl Alcohol (IPA) Wipes – 99%
Product# 1610, 1610CP
Product Description
Convenient, low-linting wipes are pre-saturated with 99.8% pure IPA.
• Ideal for electronics cleaning
• Plastic-safe
• Lint-free & tear resistant
Specifications
ASTM D770-05
Packaging Options
• Individually wrapped wipes (-50PK) - Ideal for tool kits and field
applications
• Flip-top tubs (-100FL, -150FL) - Spring-loaded lid automatically
closes and sealed top reduces waste from dry-out
• Disposable tubs (-100DSP, -150DSP) - Lower cost disposable tub
• Refill rolls (-100R, -150R) - Replacement wipes fit in either Flip-top
or Pop-up tubs to save money and reduce waste
Wipe Options
• Individually wrapped wipes (1610-50PK)
o Nonwoven cellulose-poly material
o 5.5”x5.5” (140mm x 140mm)
o 3g IPA/packet
• Nonwoven Polyester Material (1610)
o 5”x8” (127mm x 203mm)
o 550g IPA/roll
o 100 wipes/roll
• Commercial-Grade
Nonwoven Cellulose-Poly Material (1610CP)
Engineered for high volume PCB assembly and other types of
production. This cellulose-poly material has greater absorbency
and is less likely to snag or shred, making these wipes ideal for
stencil and PCB cleaning.
o 5”x8” (127mm x 203mm)
o 650g IPA/roll
o 150 wipes/roll – 50% more wipes & less packaging waste!
Typical Product Data and Physical Properties
Physical State: Liquid
Odor: Alcohol odor
Appearance: Clear, Colorless liquid
pH: Neutral
Percent Volatile: 100
Vapor Pressure: 33 mmHg at 20°C
Vapor Density: 2.07 (Air=1)
Boiling Point: to 180°F (82°C)
Freezing Point: to -126°F (-88°C)
Flashpoint and Method: 53°F (11.7°C) Open Cup
55°F (13°C) Closed Cup
Shelf life: 2 years
Packaging and Availability
1610-50PK 50 ct. individually wrapped
1610-100FL 100 ct. in flip-top tub, non-woven poly mtl.
1610-100DSP 100 ct. in disposable tub, non-woven poly mtl.
1610-100R 100 ct. refill, non-woven poly mtl.
1610CP-150DSP 150 ct. in disposable tub, non-woven cellulose- poly mtl.
1610CP-150R 150 ct. refill, non-woven cellulose-poly mtl.
Rev. D (4/20) Page 1 of 2
800-858-4043 • www.techspray.com
%TEGHSPRAY‘ ‘ Data Sheet My mum Page) on Isopropyl Alcohol (IPA) Wipes — 99% Environmental Policy % TEGHSPRAY'
Rev. D (4/20) Page 2 of 2
Isopropyl Alcohol (IPA) Wipes – 99%
Product# 1610, 1610CP
Usage Instructions
Remove a saturated lint-free cloth from the container. Wipe surface
with cloth, rotating the cleaning side of the wipe periodically. Note:
Can affect some highly sensitive or low grade plastics. Test on
inconspicuous area before general use.
Free liquid alcohol may be present when the bag is first opened. This
will absorb over time. No-mess method to insert refill bags:
Step 1 – Insert unopened refill bag into container.
Step 2 – Cut off the top of the bag that is sticking out of the container.
Step 3 – Feed wipe from center of the roll through the lid.
Step 4 – Replace lid.
Environmental Policy
Techspray® is committed to developing products to ensure a safer and
cleaner environment. We will continue to meet and sustain the
regulations of all federal, state and local government agencies.
Resources
Techspray® products are supported by global sales, technical and
customer services resources.
For additional technical information on this product or other
Techspray® products in the United States, call the technical sales
department at 800-858-4043, email tsales@techspray.com or visit our
web site at: www.techspray.com.
Important Notice to Purchaser/User: The information in this
publication is based on tests that we believe are reliable. The results
may vary due to differences in tests type and conditions. We
recommend that each user evaluate the product to determine its
suitability for the intended application. Conditions of use are outside
our control and vary widely. Techspray’s only obligation and your only
solution is replacement of product that is shown to be defective when
you receive it. In no case will Techspray® be liable for any special,
incidental, or consequential damages based on breach of warranty,
negligence or any other theory.
North America
Techspray®
8125 Cobb Center Drive
Kennesaw, GA 30152
800-858-4043
tsales@techspray.com
Europe
ITW Contamination Control BV
Saffierlaan 5, 2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
Countries outside the US
Call to locate a distributor in your
country