Design contains obsolete parts

IC = NS) ADM00812: 5 Buck + 1 Boost Converter, 2.4 ~ 5.5V in

Summary

MIC7401 Evaluation Board was developed to evaluate the capabilities of the MIC7401 Power Management Integrated Circuit (PMIC). The board features 5 DC-DC buck converters capable of delivering 3A each and a boost converter with a 200mA current capability and I2C programmable output voltages.

The MIC7401 Evaluation Board also features the MCP2221 USB to I2C bridge that enables direct communication and programming functionality by connecting the MIC7401 to the Graphic User's Interface (GUI).

The MIC7401 is a powerful, highly-integrated, configurable, power-management IC (PMIC) featuring five synchronous buck regulators, one boost regulator, and high-speed I2 C interface with an internal EEPROM and micro-power shutdown. The device offers two distinct modes of operation "standby mode" and "normal mode".

In normal mode, the programmable switching converters can be configured to support a variety of features, including start-up sequencing, timing, soft-start ramp, output voltage levels, current-limit levels, and output discharge for each channel.

In standby mode the PMIC can configured in a low power state by either disabling an output or by changing the output voltage to a lower level. Independent exit from standby mode can be achieved either by I2C communication or the external STBY pin.

Please review the MIC7401 Datasheet in conjunction with the Evaluation Board User Guide for a complete understanding of the device function.

Specifications

Manufacturer	Microchip Technology
Category	AC/DC and DC/DC Conversion
Sub-Category	DC/DC SMPS - Multi Output
Eval Board Part Number	ADM00812-ND
Eval Board Supplier	Microchip Technology
Eval Board	Normally In Stock
Topology	Step Up/Down
Outputs and Type	6 Non-Isolated
Voltage Out: Highest Current First	1.05V, 1.1V, 1.25V, 1.8V (x2), 12V
Current Out	200mA (Boost), Up to 3A (per Buck Channel)
Voltage In	2.4 ~ 5.5 V
Efficiency @ Conditions	>90%, 5V in, 3.3V @ 0.001 ~ 3 A >90%, 5V in, 2.5V @ 0.001 ~ 3 A >90%, 5V in, 1.8V @ 0.01 ~ 2.5 A >85%, 5V in, 1.5V @ 0.001 ~ 3 A >80%, 5V in, 0.8V @ 0.001 ~ 3 A
Voltage Out Range	0.8 ~ 3.3 V (Buck), 7.0 ~ 15 V (Boost)
Features	Current Limit (Adj. or Fixed) I²C Interface Light Load Mode Memory Available On-Board Power Good Output Short Circuit Protection Shutdown, Enable, Standby Soft Start Thermal Protection USB Interface
Switching Frequency	2 MHz
Standby Current [Typical]	5 µA
Quiescent Current [Typical]	200 µA
Component Count + Extras	34 + 30
Internal Switch	Yes
Design Author	Microchip Technology
Application / Target Market	Digital Cameras FPGA / DSP / Processors Handheld games Point of Load (PoL) Power: Industrial Power RF: WLAN Access Points Robotics Servers Tablets White Goods
Standby Current [Maximum]	- Not Given
Quiescent Current [Maximum]	240 µA
Main I.C. Base Part	MIC7401
Date Created By Author	2017-01
Date Added To Library	2018-05