Texas Instruments

DRV8870 Brushed-DC Motor Driver

Texas Instruments offers its DRV8870, 3.6 A, brushed-DC motor driver that is fully protected from faults and short circuits

Image of Texas Instruments' DRV8870 Brushed-DC Motor DriverTexas Instruments' DRV8870 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6 A peak current. The inputs can be pulse-width modulated (PWM) to control motor speed using a choice of current-decay modes. Setting both inputs low enters a low-power sleep mode.

The DRV8870 device features integrated current regulation, based on the analog input VREF and the voltage on the ISEN pin, which is proportional to motor current through an external sense resistor. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage especially for motor startup and stall conditions.

The device is fully protected from faults and short circuits including under-voltage (UVLO), over-current (OCP), and over-temperature (TSD) protections. When the fault condition is removed the device automatically resumes normal operation.

Features
  • H-bridge motor driver
    • Drives one DC motor, one winding of a stepper motor, or other loads
  • Wide 6.5 V to 45 V operating voltage
  • 565 mΩ typical RDS(on) (HS + LS)
  • 3.6 A peak current drive
  • PWM control interface
  • Integrated current regulation
  • Low-power sleep mode
  • Small package and footprint
    • 8-pin HSOP with PowerPAD
    • 4.9 mm x 6 mm
  • Integrated protection features
    • VM under-voltage lockout (UVLO)
    • Over-current protection (OCP)
    • Thermal shutdown (TSD)
    • Automatic fault recovery

DRV8870 Brushed-DC Motor Driver

ImageManufacturer Part NumberDescriptionFunctionOutput ConfigurationInterfaceAvailable QuantityPriceView Details
IC MOTOR DRVR UNIPLR 8SO PWRPADDRV8870DDARIC MOTOR DRVR UNIPLR 8SO PWRPADDriver - Fully Integrated, Control and Power StageHalf Bridge (2)PWM18111 - Immediate$1.79View Details

Evaluation Board

ImageManufacturer Part NumberDescriptionFunctionUtilized IC / PartPrimary AttributesAvailable QuantityPriceView Details
EVAL BOARD FOR DRV8870DRV8870EVMEVAL BOARD FOR DRV8870Motor Controller/DriverDRV8870Single-H-Bridge Driver13 - Immediate$50.41View Details
Published: 2016-08-10

Related Product Highlight

DSLVDS1047 Low-Voltage Differential Signaling (LVDS) Quad-Channel Line Driver Texas Instruments' DSLVDS1047 LVDS quad-channel line driver is designed for applications that require low power dissipation and high data rates.
LMR33610/30/40 SIMPLE SWITCHER® Synchronous Buck Converters Texas Instruments' LMR33610/30/40 DC/DC converters can convert a higher DC voltage to a lower DC voltage with a maximum current of 1 A, 3 A, or 4 A.
Logic Solutions Texas Instruments wide array of digital and analog components target all applications from wearables to automated factory equipment - In stock at DigiKey

Related Articles and Blogs

The Basics of Stepper Motors An evaluation of the pros and cons of hybrid stepper motor along with a quick overview of how they work.
Robotics, the Next Generation To develop intelligent and sophisticated robot systems requires innovative analog and embedded technologies and Texas Instruments offers some helpful products.
Low-Cost 8- and 16-Bit MCUs Offer Expanded Features and Application Focus With the focus shifting to 32-bit architectures, it can be easy to forget that 8- and 16-bit MCUs are still vital parts of the design engineer’s toolbox.