PTN3222 One-Port eUSB2-to-USB Redriver

Product Highlights > PTN3222 One-Port eUSB2-to-USB Redriver

            PTN3222 One-Port eUSB2-to-USB Redriver
                    NXP's redriver implements a control state machine to handle various operating modes and transitions
    

Image of NXP's PTN3222 1-PORT eUSB2-to-USB Redriver NXP's PTN3222CUK and PTN3222GM are one-port eUSB2-to-USB2 redriver ICs that perform translation between eUSB2 and USB2 signaling schemes. The PTN3222 supports host repeater, device repeater, or dual-role repeater functions.

These two devices provide a target I²C register interface to initialize the required functionality and features as per the platform application's need. The I²C target address is selectable using a quaternary input pin (that selects one of the four addresses). The RST_N pin is used to reset the IC without power cycling.

The PTN3222 is powered by two power supplies (VDD3V3 and VDD1V8) and is available in a small, thin WLCSP12 package (1.55 mm x 1.18 mm x 0.455 mm body with 0.35 mm pitch) and a QFN12 package (1.75 mm x 2.2 mm with 0.4 mm pitch).

Features

Provides eUSB2 redriver and level shifting to USB2
Signal Integrity (SI) configurability for both eUSB2 and USB2 sides
Supports eUSB2 and USB2 power management
Implements a control state machine to handle various operating modes and transitions
Supports register access protocol (RAP) access
Control interface/configuration via I²C interface
I²C interface supports data rates up to 1 MHz (FM+)
Power supplies: VDD1V8 and VDD3V3
Operating ambient temperature range: -40°C to +85°C