Accuspray™ Catalog Datasheet by 3M

View All Related Products | Download PDF Datasheet
1
Accuspray Spray Solutions
From production to precision, thick coatings
to thin, the Accuspray Spray Solutions
portfolio coupled with the 3MPPS Paint
Preparation System offers YOU premium
performance while making cleaning
and maintenance, faster, easier and
LESS EXPENSIVE.
Truck & Trailer
Rail & Bus
Construction
Automotive
Marine
Woodworking
Mobile Refinishing
Recreational Vehicle
Aerospace
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
3M™ Accuspray™ ONE
Spray Gun System with PPS™
' ’2’: A. _. —-_-
23MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
3M AccusprayHVLP Gravity Feed Spray Guns
Item PN 07HS-Pro 1 PN 07HS-Pro 4
Cup 3M PPS Standard, 22 oz 3M PPS Standard, 22 oz
Regulator 93-103 93-103
Tip/Nozzle 1.3mm 1.5mm
Tip/Nozzle 1.8mm 1.8mm
Air Cap 725 725
Air Cap 726 726
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
Item PN 10G-Pro 1 PN 10G-Pro 3
Cup 3M PPS Standard, 22 oz none
Regulator 36-00 none
Tip/Nozzle 1.3mm 1.3mm
Tip/Nozzle 1.8mm 1.8mm
Air Cap 705 705
Air Cap 707 707
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
Series 07HS
Metal-bodied, gravity fed HVLP spray gun. For use with compressed air with a
4:1 reduction ratio. Designed for excellent atomization and application of all
automotive type coatings. The ‘Pro-Kits’ come packaged with a regulator, 2
atomizing sets and a standard (22 oz) 3M PPS cup and collar. Additional 3M
PPS cup sizes available in 3 oz, 6 oz, 13.5 oz and 28 oz sizes.
Series 10G
This composite bodied HVLP spray gun offers a lightweight solution without
compromising durability. For use with turbine supplied air or with regulated
compressed air using the 36-00 regulator. Designed for excellent atomization and
application of a wide variety of coatings including, but not limited to the following
markets: automotive, mobile refinishing, marine, industrial, woodworking, and
construction. Additional 3M PPS cups are available separately in 3 oz, 6 oz,
13.5 oz, 22 oz and 28 oz sizes.
3
3M Accuspray HVLP Pressurized Spray Guns
Series 10GP
The pressurized cup version of the Series 10G spray gun. The composite body offers a light weight solution
without compromising the durability. This gun comes packaged with the 3M PPS H/O Pressure 6 oz cup (28 oz
size available separately) which increases the versatility and application speed, allowing for excellent atomization
of coatings, from thick to thin. Great for production or touchups and everything in between.
Item PN 10GP-Pro 1 PN 10GP-Pro 4
Cup 3M PPS Type
H/O Mini Pressure, 6 oz
3M PPS Type
H/O Mini Pressure, 6 oz
Regulator 36-00 36-00
Tip/Nozzle 0.9mm 1.1mm
Tip/Nozzle 1.3mm 1.5mm
Air Cap 5 7
Air Cap 8 9
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
Series 10
The Accuspray Series 10 gun has been referred to as one of the softest atomizing spray guns on the market.
This gun can be used with turbine supplied air or with regulated compressed air using the 36-00 regulator. This
bottom (siphon) feed gun comes packaged with the 3M PPS H/O Pressure 28 oz cup (6 oz H/O Pressure cup
available separately). Great for production or touchups and everything in between.
Item PN 10-Pro 1 PN 10-Pro 3 PN 10-Pro 4 PN 10-Pro 6
Cup 3M PPS
Type H/O Pressure, 28 oz none 3M PPS
Type H/O Pressure, 28 oz none
Regulator 36-00 none 36-00 none
Tip/Nozzle 0.9mm 0.9mm 1.1mm 1.1mm
Tip/Nozzle 1.3mm 1.3mm 1.5mm 1.5mm
Air Cap 5 5 7 7
Air Cap 8 8 9 9
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
4
3M Accuspray HVLP Pressure Feed Spray Guns
Series 12S Your solution for BOTH Production (bulk) & Precision (cup) spraying!
Built for the toughest Industrial applications, this composite-bodied spray gun offers light weight, without
compromising durability. The Series 12S can be used on bulk feed, pressure pot or pump applications,or with a 3M
PPS H/O Pressurized cup (available in 28 oz and 6 oz sizes). For use with compressed air, this HVLP spray gun offers
excellent atomization from the thickest to thinnest of coatings, from production to precision spray patterns.
Item PN 12S-Pro 1 PN 12S-Pro 3 PN 12S-Pro 4 PN 12S-Pro 6 PN 12S-Pro 9*
Cup 3M PPS Type H/O
Pressure, 28 oz none 3M PPS Type
H/O Pressure, 28 oz none none
Regulator 93-103 none 93-103 none none
Tip/Nozzle 0.9mm 0.9mm 1.1mm 1.1mm none
Tip/Nozzle 1.3mm 1.3mm 1.5mm 1.5mm 1.8mm
Air Cap 5 5 7 7 none
Air Cap 8 8 9 9 10 (Composite aircap)
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
Item PN 12SZ-Pro 1 PN 12SZ-Pro 2
Cup 3M PPS
Type H/O Pressure, 28 oz none
Regulator 93-103 none
Needle/Nozzle 1.3mm 1.3mm
Needle/Nozzle 1.8mm 1.8mm
CAC 8 8
CAC 10 10
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
Series 12SZ Zinc coating resistant!
Zinc compatible version of the series 12S spray gun. All wetted parts are made
from proprietary non-stick materials including a full composite needle, nozzle,
air cap and fluid passage virtually eliminating material buildup inside of the
spray gun. The 12SZ-Pro 1 kit comes with the 3M PPS Pressure 28 oz cup
and 93-103 air pressure regulator.
*Ideal for Adhesive applications
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
5
3M Accuspray 2 Quart Remote Cup Packages
Series 39
The perfect package for applications requiring 2 quarts of material or a remote cup. These packages contain our
Series 12S Spray Guns along with a 2 quart remote cup with dual regulators, 6 foot air and fluid hoses, 2 needle
tip/nozzle sets and 2 air caps.
Item PN 39-Pro 1 PN 39-Pro 2
Cup/
Regulator 42-530 2qt cup/lid & regulator 42-530 2qt cup/lid & regulator
Tip/Nozzle 0.9mm 1.1mm
Tip/Nozzle 1.3mm 1.5mm
Air Cap 5 7
Air Cap 8 9
• For a full list of 3M PPS Lids, Liners and Accessories, go to page 21
• Additional atomizing sets available, go to page 9
imm- m“— A n “
63MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
Series 23K (3 stage, 110 volt)
Item PN 23K-Pro 1
Cup 3M PPS Type H/O Pressure, 28 oz
Tip/Nozzle 0.9mm
Tip/Nozzle 1.1mm
Tip/Nozzle 1.5mm
Air Cap 6
Air Cap 9
Series 240K (4 stage, 110 volt)
Item PN 240K-Pro 1
Cup 3M PPS Type H/O Pressure, 28 oz
Tip/Nozzle 0.9mm
Tip/Nozzle 1.1mm
Tip/Nozzle 1.5mm
Air Cap 6
Air Cap 9
Turbine Packages
These two packages include our Accuspray Series 10 bottom (siphon) feed spray gun and
3M PPS H/O Pressure 28 oz cup. We offer a choice of a 3 stage or 4 stage turbine. Both
packages come with a 30 foot air hose with whip and quick disconnect fitting, (3) needle tip
and nozzle sets, and (2) aluminum air caps.
3M Accuspray Turbine Reference Guide
Series 240C (4 stage, 110 volt)
Item PN 240C-Pro 1
Cup 2 Quart
Cup 3M PPS Type H/O Mini Pressure, 6 oz
Tip/Nozzle 0.9mm
Tip/Nozzle 1.1mm
Tip/Nozzle 1.5mm
Air Cap 6
Air Cap 9
3M Accuspray Turbine/Compressor Package
Series 240C Turbine/Compressor
The Series 240C is a 4 stage turbine with a small built-in compressor for pressurizing the 2 qt.
remote cup assembly. The 240C package includes the Series 10 bottom (pressure) feed spray
gun, a 2 qt. remote aluminum cup with 6 foot hoses, 3M PPS H/O Mini Pressure 6 oz cup,
(3) needle tip and nozzle sets, and (2) aluminum air caps.
7
Series 23G (3 stage, 110 volt)
Item PN 23G-Pro 1
Cup 3M PPS Standard, 22 oz
Tip/Nozzle 1.3mm
Tip/Nozzle 1.8mm
Air Cap 705
Air Cap 707
Series 240G (4 stage, 110 volt)
Item PN 240G-Pro 1
Cup 3M PPS Standard, 22 oz
Tip/Nozzle 1.3mm
Tip/Nozzle 1.8mm
Air Cap 705
Air Cap 707
3M Accuspray Gravity Feed Turbine Packages
Turbine Packages
These two packages include our Accuspray Series 10G gravity feed spray gun and the 3M
PPSStandard 22 oz cup. We offer a choice of a 3 stage or 4 stage turbine. Both packages
come with a 30 foot air hose with whip and quick disconnect fitting, (3) needle tip and nozzle
sets, and (2) aluminum air caps.
Turbines ONLY
Item Description
Part Number: 23i-T Series 23 Turbine Unit
Part Number: 240-T Series 240 Turbine Unit
Part Number: 240C-TC Series 240C Turbine/Compressor Unit
3M Accuspray Turbines ONLY
Turbines ONLY
The Series 240C is a four stage turbine with a small built-in compressor for pressurizing a
remote cup assembly.
. .7
8
3M Accuspray Fluid Handling Equipment
Attached Cup Assemblies
As a quick reference, cup parts are also listed. All items listed as NSS are not sold separately.
Part # Cup Type Lid Assembly Cup Only Check Valve Gasket
41-11 ½ Pint Cup Pressurized 94-101 94-082 94-049/3 94-084/4
41-14 250 mL Cup Pressurized NSS NSS 94-666/3 94-662/2
41-22 1 Quart Pressurized 94-057 94-056 94-049/3 94-034/4
97-257 600 mL Gravity Cup – Aluminum 97-261 97-259 - 97-262/2
97-258 1000 mL Gravity Cup – Aluminum 97-261 97-260 - 97-262/2
Storage Cups & Caps
Items listed as NSS are Not Sold Separately.
Part # Cup Type Cap Assembly Cup Only
94-665 250 mL Storage up with Cap - Used w/ 41-14 NSS NSS
2 Quart Remote Cup Assemblies
6' air and fluid hose assemblies are available for purchase separately, See page 11.
Part # Cup Type Fluid Hose Air Hose Gasket
42-03 2 Qt. Cup Assembly – No Regulator - - 94-122
42-130 2 Qt. with Single Fluid Regulator - - 94-122
42-530 2 Qt with Dual High-Pressure Regulator - - 94-122
3M Accuspray Regulator Assemblies
Shop Air Regulator and Gauge Assemblies
Part Number Description
36-00 Low pressure mini-regulator with QD and gauge assembly
93-103 High pressure mini-regulator and gauge assembly
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
9
3M Accuspray Air Caps, Tips and Nozzles
Air Caps
To order, replace the “x” with the desired size. For example 91-009-10
Part Number Description Sizes Gun Model
91-009-x Standard Composite Air Cap 8, 10, 11, 10, 10GP, 12S, 12SZ
91-071-x Standard Aluminum Air Cap 3, 4, 5, 6, 7, 8, 9, 11 10, 10GP, 12S
97-009-xxx Gravity Aluminum Air Cap 704, 705, 707 10G
97-077-xxx High Solids (HS) Aluminum Air Cap 725, 726 07HS
Composite Tips
To order, replace the “x’s” with the desired size. For example 91-107-043/4
Part Number Description Sizes Gun Model
91-107-xxx/4 Standard Composite Tips Pack
of 4
.021, .028, .036, .043, .051, .061, .072,
.084, .110 10, 10GP, 12S
97-019-xxx/4 Gravity Composite Tips Pack of 4 728, 736, 743, 751, 761, 772, 784 07HS, 10G
Composite Tips/Stainless Nozzle Sets
To order, replace the “x’s” with the desired size. For example 91-143-043DT
Part Number Description Sizes*** Gun Model
91-143-xxxDT Standard Tip & Nozzle .021, .028, .036, .043, .051, .061,
.072, .084, .110 10, 10GP, 12S
97-050-xxx 10G 751, 761, 772, 784 10G
97-079-xxx 07 High Solids (HS) Tip & Nozzle 736, 743, 751, 761, 772 07HS
Metric Conversion Chart
.021
q
.028
q
.036
q
.043
q
.051
q
.061
q
.072
q
.084
q
.110
q
728 736 743 751 761 772 784
0.5mm 0.7mm 0.9mm 1.1mm 1.3mm 1.5mm 1.8mm 2.0mm 3.0mm
***Refer to Metric Conversion Chart
=I . n EM!“- ;;;;; ®o ' o 0 \ | C
10
3M Accuspray Maintenance Parts
Gun Maintenance Kits
Part Number Gun Models
91-028 10
91-028-G 10G, 10GP
91-119 12s, 12sz
97-049 07, 07HS, 07HSP
Gun Body Replacement Kits
Part Number Gun Models
91-152-A 10
91-152-B 12s, 12sz
91-152-G 10G, 10GP
Turbine Filter Packages
Part Number Turbine Models
92-172 240C Series
92-254 23 Series
92-301 240 Series
Maintenance Tools
Part Number Description
91-470 Gun Brush Kit
97-047 Gun Wrench – Metal Body Guns
Turbine Carbon Brush Sets
Part Number Turbine Models
92-303-A/2 23, 240, 240C
92-426/2 23HV Series – 240v
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
“I ' figi‘hfi“ x.» ‘ m. 7
11
3M Accuspray Maintenance Parts
Fluid Cup Parts
Part Number Description Pack Qty
94-021/3 Diaphragm, 1 Qt. Cup Lid fits 41-22 and 41-42 3
94-034/4 Gasket, 1 Qt. Cup Lid, fits 41-22 4
94-049/3 Check Valve, Fits 41-14, 41-22, 41-42 3
94-064/3 Spring Clips to retain Diaphragm, fits 41-22 and
41-42
3
94-084/4 Gasket for 1/2 Pint Cup Lid, fits 41-11 4
94-598/2 Gasket, fits 41-42 Cup 2
94-662/2 Gasket, fits 41-14 Cup 2
94-666/3 Check Valve, fits 41-14 3
97-262/2 Gasket, fits 97-257 and 97-258 Gravity Cups 2
UH-1377/3 Gasket, fits 600 mL, 650 mL, and 850 mL
Pressure Cups
3
Common Hose Assemblies
Part Number Description
60-1433006 6’ High Pressure Air Hose – 1/4” ID
60-4015003 3’ Flex Whip Hose – 3/4” ID
60-4016003 6’ Flex Whip Hose with QD – 3/4” ID
60-4018003 3' Whip Hose Assly with QD & Shut Off
60-4018006 6' Whip Hose Assly with QD & Shut Off
60-4115030 30' Low Pressure Air Hose
60-4116530 30’ Low Pressure Air Hose, QD, Whip, BCV
60-4118730 30’ Low Pressure Air Hose, QD. Whip
60-5433030 30’ High Pressure Air Hose – 5/16” ID
61-1344006.6 6 1/2 ‘ Fluid Hose – 1/4” ID
61-2344030 30’ Fluid Hose – 3/8” ID
ONE spray gun, ultimate versatility. Euiimm kromuvnu M F“: (mums ! .9 / Bahama To 11!. I35
ONE spray gun,
ultimate versatility.
AccusprayMetal Spray GunVs.
It’s not metal, but it sure acts like it.
Our mission is to take the pain OUT of painting — that means
cleaning and maintenance — and it’s got to be done without
sacrificing performance.
2.0mm1.8mm*1.4mm*1.3mm*1.2mm*
With five sizes of replaceable, interchangeable atomizing heads,
Accuspray ONE is your ONE spray gun solution.
See the full whiteboard story!
3MSpraySolutions.com/Accuspray-System
*
New!
New!
We added extra atomizing air holes to the new 1.2mm and 1.3mm
atomizing heads to ensure you’re getting the premium performance
you would expect out of your metal guns, while making cleaning
quick and easy with see through atomizing heads.
I Accusvrw IESII 1.2mm and 1.3mm ammixing heads are intended m finss1 atomixation. From automo1ive,spscialkyveh finishes and general industrial, you're surelo get p WW
13
For videos and more, visit:
www.3Mspraysolutions.com/accuspray-system
www.3Mcollision.com/accuspray-system
Ultimate Versatility.
3M Accuspray ONE Spray Gun System with PPS
(PN 16580)
1.4mm atomizing head is great for lower
viscosity coatings and achieving fine
atomization such as lacquers, single stage
paints, polyurethanes, automotive base
and clear coats, and marine top coats.
Low Viscosity
1.2mm and 1.3mm atomizing heads are intended to provide the highest quality finishes and
finest atomization. From automotive, specialty vehicle and marine to aerospace, wood
finishes and general industrial, you’re sure to get premium performance without the
complication of tedious cleaning and maintaining.
Finish Coats
1.8mm atomizing head is great for medium
viscosity coatings such as primers, lacquers
and adhesives of all kinds. Spray in any
direction, get into tight spaces and put the
adhesive right where you want it, with the
pattern you prefer.
Medium Viscosity
2.0mm atomizing head is great for heavy
body coating. Make spot repairs with
gel coat, enamels and latex paints.
Heavy Body Coat
• No maintenance kits
• Easy cleaning
Performance of a brand
new spray gun with each
new atomizing head
Spray gun requires
13CFM at 20psi
Part No. Size Kit Contents
3M Accuspray
ONE Spray Gun
System with PPS
16580
Atomizing
Heads: 1.2mm,
1.3mm, 1.4mm
and 1.8mm
4 -
1 -
1 -
5 -
-
-
Atomizing Heads
Air Flow Control Valve
22 oz Mixing Cup & Collar
Disposable Lids & Liners
Sealing Plugs
Color ID Clips
3M Accuspray
Atomizing Heads
16582 1.2mm (blue)
1 - Atomizing Head
16583 1.3mm (green)
16584 1.4mm (orange)
16585 1.8mm (clear)
16609 2.0mm (red) 1 - Box of 4 Atomizing Heads
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
rum» Manama ion Fm: «Fumes ! Hand tighten or use two wrenches Attach an atomizing head to the Atheh 3M'” PPS’” cup filled with ensure that it Flush out atomizing head with Remove atomizing head - be Wipe off any additional residue
14
Hand tighten or use two wrenches
to connect the air flow
control value.
1
Flush out atomizing head with
appropriate solvent until the
atomizing head is clear of coating.
7
Attach an atomizing head to the
gun - pull trigger back and hold,
making sure the release buttons
are aligned with latch openings
- listen for a double click to
ensure that it is fully engaged.
2
Remove atomizing head - be
sure to pull trigger back and pull
the atomizing head straight out
from the gun body to avoid
bending the fluid needle.
8
Wipe off any additional residue
from the fluid needle.
9
Attach 3M PPS cup filled with
coating and attach compressed
air hose.
3
AccusprayMetal Spray GunVs.
See the full whiteboard story! 3MSpraySolutions.com/Accuspray-System
Weight 11.4 oz 1.2mm,1.3mm,1.4n1m, 1.8mm, 2.0mm Operating Pressure (Full Trigger) 24 psi max Air Consumption Nozzle Size Set air pressure at 20 psi at full Adjusi fan and fluid flow to achieve When you are finished using the flow control va Inspeei atomizing head for damage Re-attach the same atomizing
15
Inspect atomizing head for damage
or wear which could result in fluid
leaks or poor performance.
10
Adjust fan and fluid flow to achieve
the desired size and wetness of the
pattern. NOTE: when closing the fan
adjustment completely it may be
necessary to re-adjust the air
flow control valve.
5
Set air pressure at
20 psi at full
trigger (air and fluid flowing).
4
Re-attach the same atomizing
head or when necessary replace
with a new one.
11
When you are finished using the
system remove the air line and
3M PPS Cup.
6
Technical Data
Weight 11.4 oz
Nozzle Size 1.2mm, 1.3mm, 1.4mm,
1.8mm, 2.0mm
Operating Pressure (Full Trigger) 24 psi max
Air Consumption 10 cfm
For more information, contact your 3M sales representative today for
procedure and application recommendations or check out our websites
at 3MSpraysolutions.com, 3MMarine.com and 3MCollision.com
For more information, contact your 3M sales representative today for
procedure and application recommendations or check out our websites
at 3MSpraysolutions.com, 3MMarine.com and 3MCollision.com
Part No. Description Items/Billing Unit Billing Units/Case
16580 3M Accuspray ONE Spray Gun System with PPS
1 4
16578 3MAccuspray ONE Spray Gun Kit
5 - Atomizing Heads (1.2, 1.3, 1.4, 1.8, 2.0 mm, Air Control Valve, Gun Hanger)
1 4
16579 3M Accuspray ONE Replacement Spray Gun ONLY (no atomizing heads)
(1 - Air Flow Control Valve)
1 4
16587 3M Accuspray HGP Spray Gun Kit - Use with PPS Type H/O Pressure Cup
(2 - 2.0 mm Nozzles, 2 - 1.8 mm Nozzles, Air Control Valve)
1 1
16609 3M Accuspray Atomizing Head Refill Kit, 2.0mm, Red
4 6
16611 3M Accuspray Atomizing Head Refill Kit, 1.8mm, Clear
4 6
16612 3M Accuspray Atomizing Head Refill Kit, 1.4mm, Orange
4 6
16614 3M Accuspray Atomizing Head Refill Kit, 1.3mm, Green
4 6
16615 3M Accuspray Atomizing Head Refill Kit, 1.2mm, Blue
4 6
16571 3M Accuspray Fluid Needle
1 1
16572 3M Accuspray Test Air Cap
1 1
16573 3M Accuspray Air Flow Control Valve
1 1
16121 3M PPS Type H/O Mini Pressure Cup - Use with PN 16587
1 4
16124 3M PPS Type H/O Large Pressure Cup - Use with PN 16587
1 2
PN 16578
PN 16587
PN 16580
PN 16579
PN16611
PN16609
Use any available atomizing head on ANY of
the 3M Accuspray Replaceable Atomizing Head Spray Guns!
PN16612
PN16614
PN16615
if V? PM 16609 PM 16611 VISCOSITY , 2am... 1.3mm ' 1 '\ I VISCOSITY fi ’2‘ Recommended Sp IU- _ VISCOSITY
17
Atomizing Head High Viscosity, Thick Coatings
Marine & Composites
Gel Coats, Adhesives, Bottom Paints, Sound Dampening Coatings,
Non-Skid Coatings
Woodworking
Latex Paints, Adhesives
General Industrial
Epoxies, Undercoatings, Hi-build Primers
Transportation (Air and Wheeled)
Undercoatings, Adhesives, Specialty Coatings
Recommended Spray Gun 3M Accuspray Spray Gun Model HGP (Pressure), PN 16587
PN 16609
2.0 mm
PN 16611
1.8 mm
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
Heavy
Atomizing Head Medium Viscosity
Marine & Composites
Gel Coats, Adhesives, Primers, Non-Skid Coatings
Woodworking
Lacquers, Adhesives
Transportation (Air and Wheel)
Primer, Adhesives
Sign Shops
Primer, Enamel, Latex
Recommended Spray Gun 3M Accuspray ONE Spray Gun, PN16578, 16579, 16580
PN 16611
1.8 mm
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
Medium
PN 16587
Atomizing Head Lower Viscosity, Finer Finish
Marine & Composites
Topcoats, Mold Release Agents
Woodworking
Lacquers, Low Viscosity Adhesives
Transportation
Basecoat, Clearcoat, Single Stage
Sign Shops
Basecoat, Clearcoat
Recommended Spray Gun 3MAccuspray ONE Spray Gun, PN16578, 16579, 16580
Atomizing Head Lower Viscosity, Finer Finish
Marine & Composites
Top coat, Clear Coat, Mold Release Agents
Woodworking
Dye Stains, Lacquers, Varnish
Transportation
Basecoat (water & solvent), Clear coat, Single Stage, Top Coats
Sign Shops
Basecoat, Clearcoat
Recommended Spray Gun 3MAccuspray ONE Spray Gun, PN16578, 16579, 16580
PN 16612
1.4 mm
PN 16615
1.2 mm
PN 16614
1.3 mm
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
Lower
Ultra Fine
Ultra Fine
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
U
l
t
r
a
F
i
n
e
U
l
t
r
a
F
i
n
e
L
o
w
M
e
d
i
u
m
H
e
a
v
y
For More Information: 3MSpraySolutions.com 3MMarine.com 3MCollision.com
18
3M Paint Application Solutions
3M Accuspray HGP System
HVLP Pressurized Gravity Feed Spray Gun
The innovative 3MAccuspray System with its replaceable
atomizing head, in conjunction with the 3MPPSH/O Pressure
Cup allows for the following benefits:
Premium Performance ON DEMAND!
Replaceable atomizing head
Available in 2.0mm, 1.8mm, 1.4mm, 1.3mm, 1.2mm
Eliminate Maintenance Kits
Molded 1-piece composite body
Lightweight, yet durable
EASY cleanup
Visual confirmation with 1.8mm, 1.4mm, 1.3mm, 1.2mm
Clean faster with less solvent
Designed for
High Viscosity Coatings
Another great product brought to you by the same people
who brought you the 3M Accuspray System, now you can
spray those high viscosity coatings such as gelcoats,
bottom paints, extremely heavy bodied primers and
adhesives. Virtually any sprayable coating.
Weight 11.4 oz Operating Pressure (Full Trigger) 15 psi max Operating Pressure (First Stage) 25 psi max Air Consumption 10 cfm Attach an atomizing head to the Attach 3M“ PPS'” cup filled with When you are finished using the Wipe off any additional residue Adjust {an and fluid flow to achieve Re-at‘tach same atomizing head
How The
System
Works
Attach an atomizing head to the
gun - pull trigger back and hold,
making sure the release buttons
are aligned with latch openings
- listen for a double click to
ensure that it is fully engaged.
1
Adjust fan and fluid flow to achieve
the desired size and wetness of the
pattern. NOTE: when closing the fan
adjustment completely it may be
necessary to re-adjust the air
flow control valve.
3
Wipe off any additional residue
from the fluid needle.
5
Attach 3M PPS cup filled with
coating and attach compressed
air hose.
2
When you are finished using the
system, pull the trigger back to
release fluid back into cup, remove
the air line, and the 3M PPS Cup.
4
Technical Data
Weight 11.4 oz
Operating Pressure (Full Trigger) 15 psi max
Operating Pressure (First Stage) 25 psi max
Air Consumption 10 cfm
Re-attach same atomizing head
or new atomizing head. Align
tabs on head with spray gun
latches, listen for ‘double click’
for secure connection.
6
3W PPS Paint Preparation System Never Clea, . Hemp again! s e ~
20
a cup again!
3M PPS Paint Preparation System
Never clean
Your all-in-one disposable solution for mixing/measuring, filtering, spraying
(in any direction!) and the temporary storage of liquid coating materials!
Part No. Description Items/Box
16299 PPS BIG RED Lid Dispenser - fits Midi, Standard & Large size PPS Lids 1
16219 PPS BIG RED Liner Dispenser - fits Midi, Standard & Large size PPS Liners 1
16298 PPS BIG RED Mini & Micro Lid & Liner Dispenser 1
3MSpraySolutions.com
For More Information:
3MMarine.com 3MCollision.com
Never clean a paint
cup again!
Stop wasting paint on
mixing cups and filters
Buy less solvent,
use up to 70% less
54.51:; a T.
21
Part No. Size Micron
(Filter) Size 3M PPS Lids & Liners Items/Box Boxes/
Case
16024 28 oz 200 Large Lids and Liners 25 1
16000 22 oz 200 Standard Lids and Liners 50 1
16112 13.5 oz Full Dia. 200 Midi Lids and Liners 50 1
16114 6 oz Full Dia. 200 Mini Lids and Liners 50 1
16028 3 oz Full Dia. 200 Micro Lids and Liners 50 1
16325 28 oz Full Dia. 125 Large Lids and Liners 25 1
16301 22 oz Full Dia. 125 Standard Lids and Liners 50 1
16312 13.5 oz Full Dia. 125 Midi Lids and Liners 50 1
16314 6 oz Full Dia. 125 Mini Lids and Liners 50 1
16328 3 oz Full Dia. 125 Micro Lids and Liners 50 1
16324 28 oz 125 Large Lids and Liners 25 1
16300 22 oz 125 Standard Lids and Liners 50 1
3M PPS Cups & Collars
16023 28 oz Large Cup/Collar 1 4
16124 28 oz Type H/O Pressure Cup (large) 1 2
16001 22 oz Standard Cup/Collar 2 4
16122 13.5 oz Midi Cup/Collar 2 4
16115 6 oz Mini Cup/Collar 2 4
16121 6 oz Type H/O Pressure Cup (mini) 1 4
16115 3 oz Micro Cup/Collar 2 4
3M PPS Starter Kits & Refill Packs
16182 28 oz 200 Large Size Starter Kit; 6 Lids & Liners; 1 Large Size Cup & Collar; 1 Large Generic Mix Ratio Insert;
10 Sealing Plugs
16183 28 oz 200 Large Size Refill Pack; 12 Lids & Liners; 10 Sealing Plugs
16382 28 oz 125 Large Size Starter Kit; 6 Lids & Liners; 1 Large Size Cup & Collar; 1 Large Generic Mix Ratio Insert;
10 Sealing Plugs
16383 28 oz 125 Large Size Refill Pack; 12 Lids & Liners; 10 Sealing Plugs
16172 22 oz 200 Standard Size Starter Kit; 6 Lids & Liners; 1 Standard Size Cup & Collar; 1 Standard Generic Mix
Ratio Insert; 10 Sealing Plugs
16173 22 oz 200 Standard Size Refill Pack; 12 Lids & Liners; 10 Sealing Plugs
16372 22 oz 125 Standard Size Starter Kit; 6 Lids & Liners; 1 Standard Size Cup & Collar; 1 Standard Generic Mix
Ratio Insert; 10 Sealing Plugs
16373 22 oz 125 Standard Size Refill Pack; 12 Lids & Liners; 10 Sealing Plugs
Accessories
16091 28 oz Large Generic Mix Ratio Inserts 10 10
16065 22 oz Standard Generic Mix Ratio Inserts 10 10
16155 13.5 oz Midi Generic Mix Ratio Inserts 10 10
16066 6 oz Mini Generic Mix Ratio Inserts 10 5
16067 3 oz Micro Generic Mix Ratio Inserts 10 5
16236 3M PPS Spray Gun Holder, Single 1 5
16237 3M PPS Spray Gun Holder, Double 1 1
Remove erlsling mp fmrn spray gun. Thread cmrect adapler to spray gun. Remove liner from wall dispenser and ll nm using escale m measure, Mix produel as needed. Take a lid (wilh built-in filnerl fmm wall Posillan lacking collar onto lhe 3M" 3M” PPS” shaker core is used in
3MSpraySolutions.com 3MMarine.com 3MCollision.com
Remove existing cup from spray gun. Thread correct adapter to spray gun. Remove liner from wall dispenser and
place into 3M PPS mixing cup.
Weigh the paint according to paint
manufacturer’s guidelines.
If not using a scale to measure,
insert 3M PPS mix ratio film into
cup before inserting liner in order to
measure the paint according to paint
manufacturer’s guidelines.
Mix product as needed. Take a lid (with built-in filter) from wall
dispenser and snap into the 3M
PPS cup/liner.
Position locking collar onto the 3M
PPS cup/liner and turn until tight.
Insert sealing plug prior to shaking.
3M PPS shaker core is used to
distribute clamping force when shaker
machines are used to mix material.
1 2 3 4
5 6 7 8
Visit our websites for a list of all 45 spray gun adapters:
3M PPS Paint Preparation System
An innovative system from 3M which enables painters to mix less paint and drastically reduces the
amount of solvent and technician time required for gun cleaning, improving operator efficiency by
as much as 15%.
3M PPS Paint Preparation System is a unique, closed system which eliminates the need for traditional mixing cups and paint strainers.
Now, paint can be mixed and sprayed out of the same 3M PPS liner with a lid and built-in filter. Specifically designed adapters allow painters to use
the 3MPPS system with virtually any spray gun. A key advantage of this closed system is that it enables a painter’s spray gun to function at any angle,
even upside down! The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. The 3MPPS system is
therefore a cleaner, faster system, safe from outside contamination and offers considerable time and solvent savings in regards to gun cleaning.
Spray gun with some! adapmr is Make surethanhe lid fingers are fuIIy The spray gun is naw ready m Due to the mum 3M'“PP$'“ is a
23
System
Paint Preparation
3M
PPS
Spray gun with correct adapter is
attached with a quick quarter turn.
The spray gun is now ready to
spray as normal. NOTE: For spraying
upside-down, follow directions in the
“Tips” section on purging air.
Due to the fact that 3MPPS is a
closed system, painters may now spray
their gun completely perpendicular to
their intended surface without fear of
material dripping on their job.
To return material back into gun cup
before disconnecting spray gun,
disconnect air line, invert gun (gravity
feed only) and pull trigger fully for a
few seconds.
Remaining material can be capped
and stored for later use.
Storage of paint should follow all
local regulations.
When you’re done using the system,
the lid and liner can easily be removed
from the cup.
Remove unused material from
the liner and place into proper
disposal container.
12 13 14 15
Consult paint or solvent Safety Data
Sheet (SDS) in addition to local
regulations or authorities for safe use
and proper disposal.
A squeeze bottle (PN 37720) containing
solvent or water enables fast gun
cleaning once the 3M PPS cup is
removed. More efficient painters make
facility more productive.
16 17
Make sure that the lid fingers are fully
engaged above adapter edge.
9a 9b 10 11
mm "Emmau 5mm :- v-z a: u— 3‘ ACEUSPRAY 16590 awe.» u H mu, m mum-nu. 15550: (4) Ammiu'ng Heads one each 00 sizesi 2mm,l 3mm, 1.4mm andl 5mm. (1) Air Flow Comml vmve, (1) 22 oz Mixing Cup & sonar. (5) Disposable Lids a Linevs. Sezh'nu Mugs and . Easy. Spray Gun Solution.
Please recycle. Printed in U.S.A.
3M, Accuspray and PPS are trademarks
of 3M Company.
© 3M 2016 All rights reserved.
60-4401-0335-0
Paint Application Solutions
3M Center
Building 223-6N-01
St. Paul, MN 55144-1000
U.S.A.
Call 1-877-MMM-CARS (877-666-2277)
For More Information:
3MSpraySolutions.com 3MMarine.com 3MCollision.com
16580: (4) Atomizing Heads one each of sizes 1.2mm, 1.3mm,
1.4mm and 1.8mm, (1) Air Flow Control Valve, (1) 22 oz Mixing
Cup & Collar, (5) Disposable Lids & Liners, Sealing Plugs and
Color ID Clips
16582: (1) 1.2mm Atomizing Head
16583: (1) 1.3mm Atomizing Head
16584: (1) 1.2mm Atomizing Head
16585: (1) 1.3mm Atomizing Head
All-in-one disposable solution for mixing/measuring, filtering,
spraying (in any direction!) and temporary storage.*
Accuspray ONE Spray Gun System with PPS
ONE. Easy. Spray Gun Solution.
ONE Versatile Spray Gun.
*Storage of materials should follow all local and other applicable regulations.
Never clean a paint
cup again!
Stop wasting paint on
mixing cups and filters
Buy less solvent,
use up to 70% less
3M PPS Starter Kits
Part No. Size Kit Contents
3M PPS
Starter Kits
16172 Standard 22 oz 6 -
1 -
1 -
1 -
Disposable Lids & Liners
with 200 micron filters
Cup & Collar
Generic Mix Ratio Insert
Bag of 10 Sealing Plugs
16182 Large 28 oz
3M PPS
Starter Kits
(Waterborne)
16372 Standard 22 oz 6 -
1 -
1 -
1 -
Disposable Lids & Liners
with 125 micron filters
Cup & Collar
Generic Mix Ratio Insert
Bag of 10 Sealing Plugs
16382 Large 28 oz
3M PPS Starter
Refill Packs
16173 Standard 22 oz 12 -
1 -
Disposable Lids & Liners
with 200 micron filters
Bag of 10 Sealing Plugs
16183 Large 28 oz
3M PPS Starter
Refill Packs
(Waterborne)
16373 Standard 22 oz 12 -
1 -
Disposable Lids & Liners
with 125 micron filters
Bag of 10 Sealing Plugs
16383 Large 28 oz
3M PPS offered in bulk quantities in
3 oz, 6 oz, 13.5 oz, 22 oz and 28 oz
sizes. A cup for every job!
3M PPS Spray Gun Adapters can
be used to convert virtually any spray
gun in your shop!

Products related to this Datasheet

AIR HOSE 1/4 IN ID X 6 FT, 1 PER
WHIP HOSE 3 FT, 1 PER CASE
WHIP HOSE 3 FT, 1 PER CASE
WHIP HOSE ASSEMBLY 3 FT, 1 PER C
WHIP HOSE ASSEMBLY 6 FT, 1 PER C
AIR HOSE 30 FT, 1 PER CASE
AIR HOSE 30 FT, 1 PER CASE
AIR HOSE 30 FT, 1 PER CASE
FLUID HOSE 6 1/2 FT, 1 PER CASE
FLUID HOSE 30 FT, 1 PER CASE
ACCUSPRAY 1.4MM ATOMIZING HE
3M ACCUSPRAY 1.4MM ATOMI
3M ACCUSPRAY 1.4MM ATOMI
3M ACCUSPRAY 2.0MM ATOMI