Voltage Regulators - Linear

Results: 2

Filters

Stacked

Scrolling

Manufacturer

onsemiTexas Instruments

Series

-Automotive, AEC-Q100

Packaging

Cut Tape (CT)Digi-Reel®Tape & Reel (TR)Tube

Product Status

ActiveNot For New Designs

Voltage - Input (Max)

15V45V

Voltage - Output (Min/Fixed)

1.25V2.5V

Voltage - Output (Max)

13.5V20V

Voltage Dropout (Max)

0.5V @ 250mA1.2V @ 800mA

Current - Output

400mA800mA

Current - Quiescent (Iq)

200 µA10 mA

PSRR

62dB (120Hz)70dB (100Hz)

Control Features

-Enable

Protection Features

Over Current, Over TemperatureOver Temperature, Reverse Polarity, Short Circuit

Operating Temperature

-40°C ~ 125°C-40°C ~ 150°C

Package / Case

TO-261-4, TO-261AATO-263-6, D²Pak (5 Leads + Tab), TO-263BA

Supplier Device Package

D2PAK-5SOT-223-4

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

REG1117 IC REG LIN POS ADJ 800MA SOT223 Texas Instruments	2 680 In Stock 10 000 Factory	1 : 2,88000 € Tube	-	Tube	Active	Positive	Adjustable	1	15V	1.25V	13.5V	1.2V @ 800mA	800mA	10 mA	-	62dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
NCV4276BDSADJR4G IC REG LIN POS ADJ 400MA D2PAK-5 onsemi	1 182 In Stock	1 : 2,03000 € Cut Tape (CT) 800 : 1,20351 € Tape & Reel (TR)	Automotive, AEC-Q100	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Not For New Designs	Positive	Adjustable	1	45V	2.5V	20V	0.5V @ 250mA	400mA	200 µA	35 mA	70dB (100Hz)	Enable	Over Temperature, Reverse Polarity, Short Circuit	-40°C ~ 150°C	Surface Mount	TO-263-6, D²Pak (5 Leads + Tab), TO-263BA	D2PAK-5

Showing

of 2

Voltage Regulators - Linear

Linear voltage regulators are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.