LSM0805452V Green Datasheet by Visual Communications Company - VCC

LONG LIFE OPTIONS LED
LSM0805452V | 05/19 | Page 1 of 8vcclite.com | 1.800.522.5546
LSM0805 Series
0805 SMD LED Package
2.0 x1.25x 1.1 mm SMD Chip LED
LSM0805452V Green SMD LED. Low Profile Surface Mount LED with
High intensity light output and low power consumption
Application
Key Features
• Wearable and Portable Devices
• Automotive Features
• Navigations Systems
• 2.0 x 1.25 mm (0805 package/2012 metric) Chip SMD LED
• 1.1 mm [0.043 in] in thickness
• Low power consumption
• RectangleflattopLED
• Wide viewing angle (120°)
• Optimizedlightcouplingbyinterreflector
• GaInP technology
• Top emitting package
• Small0805LEDpackage,flexibleapplicationwithsmallspacerequired.
• Available in a range of colors: red, white, green, blue and yellow making it ideal for status indication
• Cost-efficientsolutionforlow-powerandcompactelectronicequipmentdesigns
• Compatiblewithautomaticplacementequipmentandavailableinautomation-friendlytapeandreel
• IdealforspecialconfigurationsforautomatedPCboardassemblyandspace-sensitiveapplications
• Pb-free
• Moisture sensitivity level: 3
• Package 3,000 pieces per reel
• Compliant with RoHS and REACH
• Home and Smart Appliance
• Backlit Keypads
• Medical Devices
• Health Care Application
• Industrial Control Systems
• Status Indicator
Series Type oi LED Package Size Lens Coloring Color Voltage i i. i SM i 0505 i 4 5 2v Series Voltage L i LED 2v 2 Voil' 3V 3 Voil" Mouming Type Coior ‘Red, Green‘ Yeliow SM SMD 1 Red "White Eiue 4 While Package Size 5 Green (1905 i 0505 Package 5 We 7 Yeiiow Lens Caioring 4 Water Ciear 5 Yeiiow Ciear T>® L \ L— _J ir 4| T A; i \ 5 3] L_J L_J
LSM0805452V | 05/19 | Page 2 of 8vcclite.com | 1.800.522.5546
Ordering Data
Product Dimensions
1.20
Polarity
Recommended Soldering Pattern
1.40
2.0
[.047]
1.1
0.50
1.25
R0.20
[.008]
0.40 0.40
1.1 1.0
2.0
1.35
[.049]
[.02]
[.043]
[.043] [.039]
[.079]
[.053]
[.016] [.016]
[.055]
[.079]
Notes:
1. All dimensions are in mm [in]
2. Tolerance is ±0.1 mm [.004 in] unless otherwise noted
3.Thespecifications,characteristicsandtechnicaldatadescribedinthedatasheetaresubjecttochangewithoutpriornotice.
Items Symbol Ratings Unit Reverse Voltage VR 5 V Forward Current If YG 20 mA Operation Temperature Topt -40~+85 “C Storage Temperature Tstg -40~+100 “C Electrostatic Discharge (HBM) ESD YG 2000 V Power DiSSlpation Pt VG 75 MW 23$: :fl’g‘: figs” IFP YG 50 MA Soldering Temperature Tsol Reflow Soldering: 240°C for 10 sec Parameter Symbol Min Typ. Max. Unit Condition Luminous Intensity lv YG -- 35 -- mcd lF:20mA Peak Wavelength AP YG -- 571 -- nm lF=20mA Dominant Wavelength Ad YG 568 -- 573 nm lF=20mA Spectrum Radiation Bandwidth AA YG -- 25 -- nm |F:20mA Forward Voltage VF YG 1.7 -- 2.3 v lF=20mA Viewing Angle 291/2 ~ 120 ~ deg |F=20rnA Reverse Current IR YG ~ W 5 uA VR 25v
LSM0805452V | 05/19 | Page 3 of 8vcclite.com | 1.800.522.5546
Product Specifications
AbsoluteMaximumRatings(ta=25˚C)
Notes:
1. Tolerance of Luminous Intensity ±3%
2. Tolerance of Dominant Wavelength ±1nm
3. Tolerance of Forward Voltage ±0.03V
Relative Luminous Intensity (%) Spectrum Distribution Ta:25' 10 75 ll so ll 25 / l D 500 550 600 700 750 Wavelength Ap (nm) Luminous Intensity Vs. Ambient Temperature Relative luminous intensity (“/a) Forward Current HmA) 100 100 to 200 40 an ac mo Ambient Temperature Ta (”0) Forward Current Derating Curve on 4:: aa 25 an m o a 20 40 so as 100 Ambient Temperature Ta CC) Forward Current I» (mA) Forward Current Vs. Forward Voltage Ta=25' 50 40 30 20 m 0 LE 19 2.1 2,4 2.3 23 Forward Voltage (Vs) - volts Luminous Intensity Vs. Forward Current Relative luminous intensity (“/a) Ta=25' 100 10 1 1 1 10’ Forward Current IF (mA) Radiation Diagram Forward Current I» (mA) 0.5 0,3 in 0,2 0.4 0,6 Ta (0)
LSM0805452V | 05/19 | Page 4 of 8vcclite.com | 1.800.522.5546
Product Specifications
Typical Electrical-Optical Characteristics Curves
Test Sampie No liems Test Condition Hours/Cycles Size Ac/Re 1 Refiow Soldering Temp: 260:5“0 6 min 22 PCS 0/1 H: +100°C 15 min 2 Temperaiure Cycle S 5 min 300 Cycles 22 PCS 0/1 L: 40°C 15 min H: +100°C 5 min 3 Thermal Shock S 10 sec 300 Cycles 22 PCS 0/1 L: -10“C 5 min 4 High Temperature Storage Temp: 100“C 1000 Hrs 22 PCS 0/1 5 Low Temperaiure Storage Temp:-40°C 1000 Hrs 22 PCS 0/1 6 DC Operating Life |F=20mA 1000 Hrs 22 PCS 0/1 7 High Temperamre High Humidity 85“C/85%RH 1000 Hrs 22 PCS 0/1 VCC’”
LSM0805452V | 05/19 | Page 5 of 8vcclite.com | 1.800.522.5546
Reliability Data
Thereliabilityofproductsshallbesatisfiedwithitemslistedbelow.Confidencelevel:90%
LTPD: 10%
Temperature (”C ) Maximum Solder Profile Recommended Solder Profile 245 777777777777777777777777777777777777777 Minimum Solder Profile 230 777777777777777777777777777777777777 217 7777777777777777777777777777777777777777 200 --------------------------------- 150 7777777 (60-150) sec Preheat (60-180) sec : Ramp-down I l I
LSM0805452V | 05/19 | Page 6 of 8vcclite.com | 1.800.522.5546
Recommended Reflow Soldering Profile
Reflow Soldering
UsetheconditionsshowninthefigurebelowforPB-FreeReflowSoldering.
•Reflowsolderingshouldnotbedonemorethantwotimes.
• Stress on the LEDs should be avoided during heating in soldering process.
• After soldering, do not handle the product before its temperature drops down to room temperature.
For Test VF For Test IR V— ‘447 V+ V— 4N7 V+ |F=20mA VF=1.7/2.3 VR:5V |R<5lia>
LSM0805452V | 05/19 | Page 7 of 8vcclite.com | 1.800.522.5546
Precautions
Circuit Design Notes
• Storage
• Design Consideration
• Thermal Design
• Static Electricity
Moisture proof and anti-electrostatic package with moisture absorbent material are used, to keep moisture to
a minimum.
Before opening the package, the product should be kept at 30°C or less and humidity less than 60%Rh, and be used
within a year.
After opening the package, the product should be stored at 30°C or less and humidity less than 10%RH, and be
soldered within 24 hours. It is recommended that the product be operated at the workshop condition of 30°C or less
and humidity less than 60%RH.
If the moisture absorbent material has faded away or the LEDs have exceeded the storage time. Baking should be
performed based on the following condition: (60+5C) for 12 hours
Indesigningacircuit,thecurrentthrougheachLEDmustnotexceedtheabsolutemaximumratingspecifiedforeach
LED. In the meanwhile, resistors for protection should be applied, otherwise slight voltage shift will cause big current
change, burn out may happen.
ItisrecommendedtouseCircuitAwhichregulatesthecurrentflowingthrougheachLEDratherthanCircuitBin
forwardVoltage(Vf)oftheLEDs.Intheworstcase,someLEDmaybesubjectedtostressesinexcessoftheAbsolute
Maximum Rating
Is paramount importance because heat generation may result in the Characteristics decline, such as brightness
decreased, Color changed and so on. Please consider the heat generation of the LEDs when making the
system design.
Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristics such as
the forward voltage becomes lower, or the LEDs do not light at the low current, even not light.
Alldevices,equipment,andmachinerymustbeproperlygrounded.Atthesametime,itisrecommendedthat
wristbands or anti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.
178 [7'0] ru— 1 [”0135] 1.75 ‘ ’ [.059] \m m m r\/ 350 V V U N 8.0 [1'33] v [.315] REwH R6Hs ::::::: COMPLIANT @ (A7 alum 4.0 [.157] User Feed Direchon —>
LSM0805452V | 05/19 | Page 8 of 8vcclite.com | 1.800.522.5546
Compliances and Approvals
Tape and Reel Specifications
Notes:
1. All dimensions are in mm [in]
2. Tolerance is ±0.1 mm [.004 in] unless otherwise noted
3.Thespecifications,characteristicsandtechnicaldatadescribedinthedatasheetaresubjecttochangewithoutpriornotice.